Note : at least 60% - 80% of your smartphone battery before flashing process,
1. Download and install MTK driver on your computer, if your had already installed just skip this step.
2. Download the stock Rom for your device that you want to flash and extract on your computer.
3. Download and extract Smart Phone Flash Tool in your computer.
4. Open the extracted folder of Smart Phone Flash Tool and click flash_tool.exe (see below)
5. Click scatter loading and load the stock ROM you downloaded to Smart Phone Flash Tool (see below)
6. Click download button to start flashing
7. Power off your device or remove the battery and connect to your computer by USB cable and press the volume up or volume down button to detect your device.
7. Once detected your device will start flashing and don`t touch anything
8. Once the flashing is done you will see the download ok. (see below)
10. Then try open your device...
Note: Beware flashing Stock Rom that will cause brick phone..
Post a Comment